Meters

defi_bf_gauges

Defi BF Gauges

Defi-Link Meter BFs are electronic blacked out gauges which are high response and refined design. When the car is off they have a black face with no numbers on them. As soon as the car is turned on, the gauges light up and are in full affect.

Defi-Link Meter BF’s need to be connected to Defi-Link Control Unit II. Up to 6 gauges can be connected and controlled by one Control Unit II. The name of the connection system is “Defi-Link System”. Defi-Link System allows gauges to be attached to Defi-Link Control Unit II with a single “DAISY CHAIN” wiring system.

•Brightness can be adjusted. There are 10 stages of brightness, 5 stages in the daytime and 5 stages in the nighttime. The brightness decreases being interlocked with the illumination switch on. The decrease in lights can be canceled.
•Driving data can be stored and can be replayed up to 3 minutes.
•Double Warning function by a meter’s LED lamp and a beep
•If Defi-Link Indicator(sold separately) is connected, it blinks when any of connected meters’ warning LED light.
•Defi-Link Indicators can be connected to each gauge.
•Differential pressure between fuel pressure and turbo can be shown if both of fuel pressure meter and turbo meter are installed.
•Defi-Link Control Unit II is necessary to operate Defi-Link Meter BF.
•Defi-Link Meter BF is applicable only for 12V vehicles.

control-unit-2

Defi-Link Control Unit II is a necessary controller to install Defi-Link Meters, Defi-Link Meter BFs, and Defi-Link Displays. Up to 7 gauges and displays can be connected and controlled by one Control Unit II. The name of the connection system is “Defi-Link System.”

Defi-Link System allows gauges and displays to be attached to Defi-Link Control Unit II with a single “DAISY CHAIN” wiring system.

•Driving data can be stored and can be replayed up to 3 minutes (*1). Pause, speed play, forward, and rewind function can be applied during playback.
•Double Warning function by a meter’s LED lamp and a beep. (*2)
•The switch panel is embossed and buzzer sounds by pushing the buttons.
•The characters and the rings on the switch panel are illuminated in white at nighttime. It makes operation in the dark easy.
•Defi-Link Indicator(sold separately) can be connected to M-WARNING connector. The indicator blinks when any of connected meters’ warning LED lights.
•Differential pressure between fuel pressure and turbo can be shown if both of fuel pressure meter and turbo meter are installed. (*3)
•UP to 7 gauges among from Defi-Link Meters and Defi-Link Meter BFs and Defi-Link Displays can be operated with one Control Unit II. Microcomputers are equipped with meters and Control Unit II. A distant meter can be operated at hand.
•Defi-Link Control Unit II Defi-Link Control Unit
•*1 Data replay Up to 3 minutes Up to 40 seconds
•*2 Warning LED and beep Only LED(no beeps)
•*3 Differential Pressure Available N/A
•Defi-Link Control Unit II is applicable only for 12V vehicles